Flowchart of Service

Mail: Service@Bestrotorcomp.com

Mail: Sales@Bestrotorcomp.com

TEL:+00862117740829780

Provide the data of your compressor from the type plate or enclosed data sheet in the illustration below. This will ensure that in the event of enquiries you will always have the most important data to hand.



1. Ensure that maintenance work is only carried out by appropriately trained persons.
2. Ensure that setting work, malfunction rectification and repair is only carried out by specialists or appropriately trained persons.
3. Prior to maintenance or repair work:
– Switch off the main switch.
– Secure main switch against unintentional switch-on.
– Check to ensure that all parts currentless.
– Disconnect the compressor from the compressed air network (relieve or block pressurized lines).
4. Exercise extreme caution during repair or maintenance work requiring the compressor to be operational. Ensure that no persons are located in the hazardous area.
5. Ensure that work on the electrical equipment is only undertaken by qualified electricians.
6. Work on parts and devices under current is prohibited. Exceptions are governed by the appropriate regulations, e.g. DIN VDE 0105.
7. Only use original spare parts, compressor oils and operating materials released by BESTROTORCOMP during repair or maintenance.
8. The operator is responsible to check the compressor daily for externally visible damage and defects, and to immediately report any changes (including operational behaviour).
9. When the automatic restart (Auto-Restart) is activated, the compressor will start automatically following a voltage loss. Prerequisite: The net pressure is lower than the set switch-on pressure.